Skip to main content

How to activate Star C3 diagnostic DAS and Xentry

 

Following displays the step-by-step guide of activating Benz star c3 OBD diagnostic system DAS and Xentry software. (2020.03V software HDD share the same activation instruction.)

MB Star C3 2020.03 xentry、epc activate video

Step 1: Open “STAR Utilities” and then come to “StartKey Center” , check Device data including: HW ID, App ID and LAN-ID information. Open “Xentry Developer V1.1.0″.

How-to-activate-Star-C3-diagnostic-DAS-and-Xentry-1
How-to-activate-Star-C3-diagnostic-DAS-and-Xentry-2

Enter HW ID number into hardware ID blank box, reset Start Date as 20140101 and Expiration Date as 20200101, then click “Generate” to get License String, copy License String.

How-to-activate-Star-C3-diagnostic-DAS-and-Xentry-3
How-to-activate-Star-C3-diagnostic-DAS-and-Xentry-5

Step 2: The system will automatically generate License String. Click StarKeys button and paste the License String to the blank. Click Save to keep setting.

How-to-activate-Star-C3-diagnostic-DAS-and-Xentry-4

Step 3: Click OK to continue when the system prompts “StartKey Saved successfully” message

How-to-activate-Star-C3-diagnostic-DAS-and-Xentry-6

Step 6: Open EWA software. Enter admin and password to login.

How-to-activate-Star-C3-diagnostic-DAS-and-Xentry-7

Step 7: Copy current MAC address (LAN-ID)

How-to-activate-Star-C3-diagnostic-DAS-and-Xentry-8

Step 8: Go back and open “Super Tools”. Open “HP-WVA keygen”, paste the current MAC address (LAN-ID) just copied into the “ID” blank. Reset the Expiration date as 01/01/2020, click “Generate” to get EPCnet and WISnet.

How-to-activate-Star-C3-diagnostic-DAS-and-Xentry-9

Step 9: Copy EPCnet and paste it into the EPC StartKey blank (see last picture.)

How-to-activate-Star-C3-diagnostic-DAS-and-Xentry-10

Step 10: Copy WISnet and paste it into the WIS/ASRA StartKey blank (see last picture.)

How-to-activate-Star-C3-diagnostic-DAS-and-Xentry-11

Step 11: The system is complete accessing authorization. Click Save to save previous settings.

How-to-activate-Star-C3-diagnostic-DAS-and-Xentry-12

The Super Star C3 diagnostic DAS and Xentry software has been activated.

Labels:

Comments

Post a Comment

Popular posts from this blog

How to setup BMW ISTA/P Loader for ICOM A2 ENET cable K+DCAN adapter

The text here, as a user manual of BMW ISTA/P Loader / ICOM Emulator,  is aimed to help those puzzled with ISTA/P Loader setup for  ICOM A2 , ENET cable, K+DCAN  USB interface. Note: all info here not original, shared by a forum member So try at your own risk! Main content: Part 1 – Compatible device Part 2 – Latest ISTA/P Loader update information Part 3 – How to install ISTA/P Loader v4.x Part 4 – How to use  ISTA/P loader with ICOM A2, K+DCAN cable, ENET cable Part 5 – How to shut down ISTA/P Part 1 – Compatible device: ISTA/P Loader compatible with ICOM A2 (OEM or clone), K+DCAN USB and ENET   Part 2 – Latest ISTA/P Loader update information: NEWEST – ISTA/P Loader V4.8  update info: Free download BMW ISTA-P Loader V4.8.7 to get all new info yourself …… ISTA/P Loader V4.2 update info: Custom resolution option added Improved detection of bmw scan tool ISTA-P install location. Improved compatibility with windows 10 Code...
1 comment
Read more

PIWIS Tester Technical Information

WF51 – Re-coding Instrument Cluster (Workshop Campaign) Important: CRITICAL WARNING – This campaign includes steps where control unit(s) in the vehicle will be programmed with the PIWIS Tester. The vehicle voltage must be maintained between 13.5 volts and 14.5 volts during this programming. Failure to maintain this voltage could result in damaged control unit(s). Damage caused by inadequate voltage during programming is not a warrantable defect. The technician must verify the actual vehicle voltage in the PIWIS Tester before starting the campaign and also document the actual voltage on the repair order. Please refer to Equipment Information EQ1401 for a list of suitable battery chargers/power supplies which should be used to maintain vehicle voltage. Model Year: 2015 Vehicle Type: Cayenne S E-Hybrid (92A) Concerns: Instrument cluster Information: The instrument cluster on the affected vehiclesmay have been coded using an incorrect coding rule. As a result, there...
Post a Comment
Read more

How to flash using a DoIP hardware

  This is an Article showing just how simple it is to flash in DTS Monaco , over DoIP (Diagnostic over Internet Protocol). These newer units can ONLY be flashed over DoIP. Trying to flash them via CAN, will very likely brick your control unit, so that should not be attempted, under any circumstances! A DoIP hardware is required to flash these newer units. Such a hardware can be an SDConnect C4 DoIP , ECOM or VCX SE . DoIP brings signifficant advantage versus CAN, by that it is much faster (eg. flashing times take a few minutes, instead of several hours, telematics disks are not needed anymore, etc etc). Once you own the equipment, it will need to be correctly set up. There are online guides available, that show how to set up these devices. Following is the DTS Monaco guide on how to flash using a DoIP hardware! First, we’ll need to select the relevant SMR-D file, of the control unit, which we’ll be interacting with. Once interfacing with the control unit, before flash...
Post a Comment
Read more