Automotive diagnostic tools

  This article will show you a guide on how to adjust the service oil and inspect by VCDS .  For more features of VCDS, see VCDS CASES . This function applies to VW,Seat,Skoda and Audi. Procedure: Connect VCDS to vehicle OBD port, running VCDS. Click “Select” to select control module Select “17-Instruments” Select “Adaptation-10” Input “Sia” for search, then select “IDE01153-SIA: maximum value of distance to service” New value change to “10000”, click “Do It!” Old value: 15000km New value: 10000km Replace? Click “Yes” Controller accepted the request. Will now read the channel again, Click “Ok” Select “IDE01154-SIA: maximum value of time to service”, new value change to “180” Click “Do It!” Function is ready.

1 Will VAG-COM work with my car? VAG-COM  will work with most Volkswagen and Audi models sold World-Wide 1994 through 2006. It will work with some cars all the way back to model year 1990. It will also work with most late-model SEAT, and Skoda models sold in markets other than North America. If your VW or Audi has a 16-pin “OBD-II style” Data Link Connector, VAG-COM will definitely work. If your car has the old “2×2″ Data Link Connection, check if there is a wire going to each pin, as shown in the picture. If there are four wires, VAG-COM should work. If there are only three, it won’t. Please see these Application Charts where you can select your model and see which modules can communicate with VAG-COM. Also see the Issues page for a few things that may not work as expected. If in doubt, e-mail us. 2 Will VAG-COM work even if my car is “chipped”? Yes. If it doesn’t work in a “chipped” car, the chip-vendor did...