Automotive diagnostic tools

Notice: Please don’t connect the network when use it , or the hard disk will be damaged cant working !!! 1.Connect the hard disk with your laptop , start your laptop ( Please dont connect the network ) 2.If cant find the hard disk , or with blue screen , please enter into the BIOS system , make a select for SATA MODE to AHCI , then restart your laptop again . 3.Please set up the date of your laptop to 2017.01.01 !!! 4.Connect  Chrysler wiTech MicroPod 2 USB Port with PC, OBD2 Port connect  with car. The computer will automatically install Chrysler wiTech MicroPod 2 hardware driver 5 After Drive installed, you can find your device in your computer device manager 6. Double click the icon of Chrysler wiTech MicroPod 2 7.You will see    Chrysler wiTech MicroPod 2 connected with software, Please click ” next” 8.please select “word off line”，Then click “finish” and go to next step 9.Select ” Connect” 10.To this step, you can choose th...

I have flash DVD for the wiTech VCI Pod  DRB III, hopefully I will get it and can then do programming on a “swap” system. Keeping my fingers crossed. It is Chrysler’s new “policy” Mopar® is currently phasing out pre-programmed PCMs for the vehicles listed. New modules will no longer be pre-programmed when received from Mopar®. Replacement of future PCMs will require programming utilizing the DRBIII and TechCONNECT. The PCM will not operate the engine until it is programmed. A Diagnostic Trouble Code (DTC) will be set – “not programmed”. CAUTION:  Extreme care must be taken when programming a calibration into a generic PCM. Do not randomly select a calibration. Once a calibration is selected and programmed, the controller cannot be reprogrammed to a different calibration. The module can only be reprogrammed to a more recent version of that calibration. When flashing a 2002 – 2004 LH vehicle the BCM may need to be d...