Skip to main content

GM Tech 2

Authentic GM software puts you in the driver’s seat to fix GM vehicles right the 1st time.
10-1
Tech 2 is loaded with features:
The large, easy-to-read, back-lit screen is the first feature you’ll notice.
* Graphic screen displays both test and graphics, and is capable
* of showing nine sensors at once.Snapshot graphing shows you any failures or glitches at a glance.
* The Tech 2 scanner is reprogrammable to keep pace with  vehicle and
* tool evolution.RS232 communications port provides the avenue to connect future
* devices to your automotive diagnostic equipment Tech 2, such as SPS reprogramming.
10-2
GM Software
Authentic GM software in the GM Tech2
* means you have the same information as GM dealers.Supports on-board diagnostics for all
* GM systems 1992 thru 2008.The authentic GM software will provide
* full bidirectional control when performing powertrain, chassis, and body diagnostics.Store DTC,freeze frame, and failure
* record for later review.Watch the status of vehicle diagnostic
* tests as they run.
10-3 10-4
The GM MDI Unit is a compact communication module that manages the transfer of
* data between a vehicle’s onboard ECU network and a PC. The GM MDI Programming Solution Bundle includes a one year subscription to the GM
* Technical Information System (TiS) SPS – a $995 value! With your included TiS SPS subscription you can always access the most current
* General Motors vehicle control module calibrations.The GM MDI Unit has an easy to grip, comfortable, rugged enclosure.
* The GM MDI Programming Solution Bundle allows the user to perform Pass-Thru
* programming procedures using software running on a laptop or desktop PC. Using the GM MDI Unit for programming frees up your Tech 2 for diagnostics.
* User can perform Data transfer and Electronic Control Unit (ECU) reprogramming.
* The GM MDI Unit has shop network communications (LAN and WLAN) capabilities.
* Future expandability, including diagnostic applications.
* GM MDI is also available without TiS SPS subscription.
10-5
CANdi Module
An industry change in protocol from OBD2TOOL to Controller Area Network (CAN) is ongoing. In order to perform diagnostics on a vehicle that uses the CAN  interface, you will need the Tech 2 and a CAN diagnostic interface  module. The CANdi module connects between the Tech 2’s  diagnostic link cable and the OBD adapter. Once the CANdi  module is connected, it can be used on all GM vehicle applications,  even those vehicles using other platforms such as OBD I and OBD II.CANdi Module is included in the Tech 2 Deluxe Kit — No. 3649.
GM Software Subscriptions
10-6
Labels:

Comments

Post a Comment

Popular posts from this blog

How to setup BMW ISTA/P Loader for ICOM A2 ENET cable K+DCAN adapter

The text here, as a user manual of BMW ISTA/P Loader / ICOM Emulator,  is aimed to help those puzzled with ISTA/P Loader setup for  ICOM A2 , ENET cable, K+DCAN  USB interface. Note: all info here not original, shared by a forum member So try at your own risk! Main content: Part 1 – Compatible device Part 2 – Latest ISTA/P Loader update information Part 3 – How to install ISTA/P Loader v4.x Part 4 – How to use  ISTA/P loader with ICOM A2, K+DCAN cable, ENET cable Part 5 – How to shut down ISTA/P Part 1 – Compatible device: ISTA/P Loader compatible with ICOM A2 (OEM or clone), K+DCAN USB and ENET   Part 2 – Latest ISTA/P Loader update information: NEWEST – ISTA/P Loader V4.8  update info: Free download BMW ISTA-P Loader V4.8.7 to get all new info yourself …… ISTA/P Loader V4.2 update info: Custom resolution option added Improved detection of bmw scan tool ISTA-P install location. Improved compatibility with windows 10 Code...
1 comment
Read more

PIWIS Tester Technical Information

WF51 – Re-coding Instrument Cluster (Workshop Campaign) Important: CRITICAL WARNING – This campaign includes steps where control unit(s) in the vehicle will be programmed with the PIWIS Tester. The vehicle voltage must be maintained between 13.5 volts and 14.5 volts during this programming. Failure to maintain this voltage could result in damaged control unit(s). Damage caused by inadequate voltage during programming is not a warrantable defect. The technician must verify the actual vehicle voltage in the PIWIS Tester before starting the campaign and also document the actual voltage on the repair order. Please refer to Equipment Information EQ1401 for a list of suitable battery chargers/power supplies which should be used to maintain vehicle voltage. Model Year: 2015 Vehicle Type: Cayenne S E-Hybrid (92A) Concerns: Instrument cluster Information: The instrument cluster on the affected vehiclesmay have been coded using an incorrect coding rule. As a result, there...
Post a Comment
Read more

How to flash using a DoIP hardware

  This is an Article showing just how simple it is to flash in DTS Monaco , over DoIP (Diagnostic over Internet Protocol). These newer units can ONLY be flashed over DoIP. Trying to flash them via CAN, will very likely brick your control unit, so that should not be attempted, under any circumstances! A DoIP hardware is required to flash these newer units. Such a hardware can be an SDConnect C4 DoIP , ECOM or VCX SE . DoIP brings signifficant advantage versus CAN, by that it is much faster (eg. flashing times take a few minutes, instead of several hours, telematics disks are not needed anymore, etc etc). Once you own the equipment, it will need to be correctly set up. There are online guides available, that show how to set up these devices. Following is the DTS Monaco guide on how to flash using a DoIP hardware! First, we’ll need to select the relevant SMR-D file, of the control unit, which we’ll be interacting with. Once interfacing with the control unit, before flash...
Post a Comment
Read more