Skip to main content

ATEQ VT55 OBDII TPMS Reset Activation Programmer ToolBlow Out Sale

VT55 OBDII TPMS diagnostic tool from Obd2tool.com. The best way to turn the tire warning light OFF ! On top of the US manufactured vehicles, the ATEQ’s VT55 OBDII reprograms Asian or European vehicles (including Toyota, Honda, Nissan, Hyundai, Kia, Mitsubishi, etc) which do not feature a TPMS self reprogramming software.VT55 OBDII  kit includes a universal OBD connector which connects to the vehicle ECU via CANbus and K-line.
Tecnicians only need to select the make of the vehicle and press the START button. It is that easy and fast to accurately activate and decode TPMS sensors and display their data or any faults they may have.
2-1
2-2
2-3
1.Blow Out Sale! Normally $1199!!* Displays: Depending on the information transmitted by the sensor, it will display sensor ID, pressure, battery state, temperature and accelerometer information.
2.Indicators: LEDs: low battery, transmision, PASS and FAIL. Buzzer.
3.Connectivity: USB port with included USB cable, PC driver and software.
Power Supply: Powered with Li-Ion rechargeable batteries with charger – low battery status
2-4
Product description:
*Get your hands on a brand new Professional Diagnostic Tool VT55 kit at a Never Before Seen price* If you miss this, you WILL kick yourself! Includes: VT55 Tool Molded Case OBDII Tool and cable Magnet CD ATEQ’s VT55 OBDII TPMS decoder / activator The best way to turn the tire warning light OFF! In addition to US manufactured vehicles, the ATEQ VT55 OBDII reprograms Asian and European vehicles including Toyota, Honda, Nissan, Hyundai, Kia, Subaru etc, which do not feature a TPMS “learn mode”.

http://cheapobd2.com/2017/11/20/ateq-vt55-obdii-tpms-reset-activation-programmer-toolblow-out-sale/
Labels:

Comments

Post a Comment

Popular posts from this blog

How to setup BMW ISTA/P Loader for ICOM A2 ENET cable K+DCAN adapter

The text here, as a user manual of BMW ISTA/P Loader / ICOM Emulator,  is aimed to help those puzzled with ISTA/P Loader setup for  ICOM A2 , ENET cable, K+DCAN  USB interface. Note: all info here not original, shared by a forum member So try at your own risk! Main content: Part 1 – Compatible device Part 2 – Latest ISTA/P Loader update information Part 3 – How to install ISTA/P Loader v4.x Part 4 – How to use  ISTA/P loader with ICOM A2, K+DCAN cable, ENET cable Part 5 – How to shut down ISTA/P Part 1 – Compatible device: ISTA/P Loader compatible with ICOM A2 (OEM or clone), K+DCAN USB and ENET   Part 2 – Latest ISTA/P Loader update information: NEWEST – ISTA/P Loader V4.8  update info: Free download BMW ISTA-P Loader V4.8.7 to get all new info yourself …… ISTA/P Loader V4.2 update info: Custom resolution option added Improved detection of bmw scan tool ISTA-P install location. Improved compatibility with windows 10 Code...
1 comment
Read more

JOHN DEERE DIAGNOSTIC OPTIONS

JOHN DEERE DIAGNOSTICS John Deere has recently been in the news because of their strict opposition to allowing farmers, equipment owners, and repair shops access to the information they need to repair and maintain their vehicles. If you read the main stream news, you would be left to believe that John Deere diagnostic with a computer is impossible. Well, we are here to help dispel that myth and give some more exposure to some tools that actually do perform diagnostics on John Deere. There are actually several solutions in the market, some of which we will cover in this post. JOHN DEERE EDL AND SERVICE ADVISOR The very best solution in the market is what the dealers use. John Deere dealers use a combination of PC-based computer with two critical components – John Deere Service Advisor software and the John Deere EDL v3 Adapter . The EDL v3 adapter looks like the picture shown below. It comes with a hard carry case, the adapter itself, a 9-pin connector, and the USB ca...
Post a Comment
Read more

How to flash using a DoIP hardware

  This is an Article showing just how simple it is to flash in DTS Monaco , over DoIP (Diagnostic over Internet Protocol). These newer units can ONLY be flashed over DoIP. Trying to flash them via CAN, will very likely brick your control unit, so that should not be attempted, under any circumstances! A DoIP hardware is required to flash these newer units. Such a hardware can be an SDConnect C4 DoIP , ECOM or VCX SE . DoIP brings signifficant advantage versus CAN, by that it is much faster (eg. flashing times take a few minutes, instead of several hours, telematics disks are not needed anymore, etc etc). Once you own the equipment, it will need to be correctly set up. There are online guides available, that show how to set up these devices. Following is the DTS Monaco guide on how to flash using a DoIP hardware! First, we’ll need to select the relevant SMR-D file, of the control unit, which we’ll be interacting with. Once interfacing with the control unit, before flash...
Post a Comment
Read more