Skip to main content

How to Solve SKP900 Resetting Token Failure

Recently,many SKP900 users asked for the solution of how to solve SKP900 Key Programmer resetting token failure trouble.They described that they can not reset skp900 token when the token use up.
Here OBD2TOOL blog would like to share the solution to solve this problem:
18-1
Download below skp900 v5.0 update software,and then update your SKP900 to version 5.0
http://www.obd2tool.com/goods-4814-SuperOBD+SKP-900+SKP900+Auto+Key+Programmer+V35.html
SKP900 Update Guide:
1). Connect SKP-900 to the computer using the USB cable,
2). Click OPEN to open the “Update3.0.bin” file,
3). Click the button “Auto Scan Port” to setup the COM port,
4). Click ACTIVATE button to start update.
Note: after open “SKP900 UPDATE TOOL V2.4.exe” you notice the above steps written in it.
skp 900 key programmer add tokens
Firstly, browse this link to download OBD2 key Programmer SKP900 activation file.
18-2
Under SKP900 activation file, there are two files named “SKP-900 Activation tool V2.2.exe” and “SKP-900_Supported_Model_Details.pdf”.
“SKP-900 Activation tool V2.2.exe” is a tool which is used to add tokens.
SKP900 add tokens notes:
1)Setup software and connect SKP900 to the computer, driver is setup
2)connect online
3)Open activation tool
4)Set the COM port
5)Activation.
After you updating SKP900 key programmer to v5.0 version,perform the resetting tokens procedures again,you will find the token have been reset.
Note:You need to update SKP900 to v5.0 firstly,then reset the token.

http://cheapobd2tool.com/2018/04/25/how-to-solve-skp900-resetting-token-failure/

Comments

Popular posts from this blog

Xprog 6.12 5.84, 5.74, 5.60, 5.55, 5.51, 100% Works Software Free Download

Free download the newest Xprog V6.12 , XPROG 5.84 , XPROG 5.74 , XPROG 5.60 , Xprog 5.55 and XPROG 5.51. 1.XPROG-M 6.12 free download: Link 1: https://mega.nz/#!625RxAqJ!Y7IInI5ZhG3titLMPnFOvALbOa2RHIp7ENG2o4PIzag Password: No need Link 2: https://share.weiyun.com/5m5Vkw0 Password: fxo5qz Xprog 6.12 XPROG V6.12 installation video: XPROG-M V6.12 Using tips and installation guide: https://www.obd2tool.com/blog/2020/02/29/how-to-use-and-install-xprog-v6-12-on-win-xp-win7win8/ 2. XPROG V5.84 free download: https://mega.nz/#!7vpDwQ4D!MrdDW0tVf-6-wXtGKqpUmj7CA2HFlFlMf5AeNvYgRbI Tips for installing Xprog V5.84. 1.Disable anti-virus program when downloading software and running software. 2.Uninstall all the software and USB drivers of the old version xprog-box on your computer, then install the new XPROG5.84 software. 3.Run 5.84 Regsisty program for several timeswhen installing software 4.Run 5.84 Regsisty file for 2 times before you run software everytime . ...

Mercedes SCN coding service need help (Solved)

 scn coding meaning: Software Calibration Number coding, short for SCN coding is intrudes by Mercedes Benz around 2005. It replaced the previous coding technique with a centralized and almost automated technique to prevent incorrect coding being selected when replacing a module. scn coding service: Can be done online or offline mercedes scn coding software: You should have working XENTRY/DAS (crack ok). For old Mercedes (-2009), you should have software version 12.2016 or earlier: For new Mercedes (2009-2017), you should have software version 03.2017 or newer: scn coding calculator: Forget it if you find it on some forums. Usually it is a fake program, it will never calculate the SCN string. mercedes coding forum: https://mbworld.org/forums/ http://www.mbclub.co.uk/forums/ http://www.mercedescla.org/forum/ http://www.mbstartool.com/ Which version for Mercedes OFFLINE SCN coding? And which for ONLINE coding? For OFFLINE coding, you should have old versions befor...

How to Restore ICOM Next with All LEDs Red and System LED Blink Red/Yellow

  Problem with BMW ICOM Next : did an update on my motorcycle and everything went fine and today when I connect icom to OBD – all leds are just on with red color, system one is blinking red/yellow. Please do exactly as follow: 1. Disconnect the ICOM Next device from the power supply or vehicle. 2. Go to the directory C:\ProgramData\BMW\ISPI\data\TRIC\ICOMNext\ICOM-Image-xx-yy-zz. Note: This directory is hidden. Please see [?00045002EN]. 2.1. Copy the file ICOM_Next-rootfs-xxxxxx.tar.gz to the root directory of the USB flash drive. 2.2. Copy the file ICOM_Next-app-yyyyyy.tar.gz to the root directory of the USB flash drive. Note: – An ICOM_Restore.bin file is not available. Please use the files from the ICOM Next firmware package as described above. – xxxxxx and yyyyyy in the file names represent the version numbers of the respective files. – If the directory contains more than one ICOM-Image-xx-yy-zz folder, please choose the most recent one, i.e. the folder with high...