Skip to main content

Seek advice from -3 Plus for Nissan Functionality


Seek advice from OBD2TOOL -3 Additionally for Nissan Operate:
Consult-3 Plus for Nissan can aid many of the styles with the Nissan and Infiniti from 1996 up until now, with all Seek advice from II & III functions. And Consult with III As well as can calcaulate the new 20 digital password for the Nissan new cars.
1. Consult-3 As well as for Nissan (Nissan Consult with 3+) work for all nissan car , infiniti car and nissan gtr car to 2016.
2. Consult-3 Moreover for Nissan work with obd-16 connector for the new kind of car, work with 14 pin connector for the old kind of car.
three. Consult-3 Additionally for Nissan aid nissan car electrolic system diagnostic operate.
4. Nissan Consult III Plus Additionally for Nissansupport nissan electromobiles such as Leaf.

In short, consult with three additionally nissan can do:
1. Scantool Diagnostics for all Nissan,Infiniti GTR and Renault
2. ECU Reprogramming:for all Nissan Infiniti GTR and Renault
3. Immobi and Smart key for all Nissan Infiniti GTR and Renault
4. Nissan GTR for Nissan GTR Diagbostics Immobi and Reprogramming
5. Electromobiles car for Nissan Electromobiles car Diagbostics Immobi and Reprogramming

So, You'll be able to perform servicing, tuning and diagnostic work on the Nissan flagship model R35 GT-R.
Programming keys, ecu reprogramming and diagnostic work on all Nissan Consult 3 Plus and infinity cars.
Labels:

Comments

Post a Comment

Popular posts from this blog

How to setup BMW ISTA/P Loader for ICOM A2 ENET cable K+DCAN adapter

The text here, as a user manual of BMW ISTA/P Loader / ICOM Emulator,  is aimed to help those puzzled with ISTA/P Loader setup for  ICOM A2 , ENET cable, K+DCAN  USB interface. Note: all info here not original, shared by a forum member So try at your own risk! Main content: Part 1 – Compatible device Part 2 – Latest ISTA/P Loader update information Part 3 – How to install ISTA/P Loader v4.x Part 4 – How to use  ISTA/P loader with ICOM A2, K+DCAN cable, ENET cable Part 5 – How to shut down ISTA/P Part 1 – Compatible device: ISTA/P Loader compatible with ICOM A2 (OEM or clone), K+DCAN USB and ENET   Part 2 – Latest ISTA/P Loader update information: NEWEST – ISTA/P Loader V4.8  update info: Free download BMW ISTA-P Loader V4.8.7 to get all new info yourself …… ISTA/P Loader V4.2 update info: Custom resolution option added Improved detection of bmw scan tool ISTA-P install location. Improved compatibility with windows 10 Code...
1 comment
Read more

PIWIS Tester Technical Information

WF51 – Re-coding Instrument Cluster (Workshop Campaign) Important: CRITICAL WARNING – This campaign includes steps where control unit(s) in the vehicle will be programmed with the PIWIS Tester. The vehicle voltage must be maintained between 13.5 volts and 14.5 volts during this programming. Failure to maintain this voltage could result in damaged control unit(s). Damage caused by inadequate voltage during programming is not a warrantable defect. The technician must verify the actual vehicle voltage in the PIWIS Tester before starting the campaign and also document the actual voltage on the repair order. Please refer to Equipment Information EQ1401 for a list of suitable battery chargers/power supplies which should be used to maintain vehicle voltage. Model Year: 2015 Vehicle Type: Cayenne S E-Hybrid (92A) Concerns: Instrument cluster Information: The instrument cluster on the affected vehiclesmay have been coded using an incorrect coding rule. As a result, there...
Post a Comment
Read more

How to flash using a DoIP hardware

  This is an Article showing just how simple it is to flash in DTS Monaco , over DoIP (Diagnostic over Internet Protocol). These newer units can ONLY be flashed over DoIP. Trying to flash them via CAN, will very likely brick your control unit, so that should not be attempted, under any circumstances! A DoIP hardware is required to flash these newer units. Such a hardware can be an SDConnect C4 DoIP , ECOM or VCX SE . DoIP brings signifficant advantage versus CAN, by that it is much faster (eg. flashing times take a few minutes, instead of several hours, telematics disks are not needed anymore, etc etc). Once you own the equipment, it will need to be correctly set up. There are online guides available, that show how to set up these devices. Following is the DTS Monaco guide on how to flash using a DoIP hardware! First, we’ll need to select the relevant SMR-D file, of the control unit, which we’ll be interacting with. Once interfacing with the control unit, before flash...
Post a Comment
Read more