Automotive diagnostic tools

  This article will show you a guide on how to adjust the service oil and inspect by VCDS .  For more features of VCDS, see VCDS CASES . This function applies to VW,Seat,Skoda and Audi. Procedure: Connect VCDS to vehicle OBD port, running VCDS. Click “Select” to select control module Select “17-Instruments” Select “Adaptation-10” Input “Sia” for search, then select “IDE01153-SIA: maximum value of distance to service” New value change to “10000”, click “Do It!” Old value: 15000km New value: 10000km Replace? Click “Yes” Controller accepted the request. Will now read the channel again, Click “Ok” Select “IDE01154-SIA: maximum value of time to service”, new value change to “180” Click “Do It!” Function is ready.

  Today we lost all keys on a 2013 Toyota Prius and we have a logged key from the junkyard so this is a used key so we need to unlock that used key first with Xhorse VVDI Key Tool Max and then generate the key with  Lonsdor K518ISE plus LKE Smart Key Emulator and then generate a key to add a key. So as you can see right here once I press start button, it says no key detected right here. Okay so gonna go ahead and unlock the key first, either you can use your VVDI Key Tool Max or if you have Lonsdor K518ISE you can do it. Part 1. Use VVDI Key Tool Max to Unlock Toyota Prius Used Key. Let’s try VVDI Key Tool Max first and I’m going to this “Special Function”. And “Unlock Toyota Smartkey” , so in order to see this is unlocked, make sure you have a good battery as you can see and you check the frequency and once it is unlocked it should have two flashes right here, we’re gonna do this like that, and we’re gonna hit “unlock”, soon unlock ok. Part 2. Use Lonsdor K518ISE